OEM Supply Er Glass - Ce: YAG Crystals – Dien


Product Detail

Related Video

Feedback (2)

We pursue the administration tenet of "Quality is exceptional, Provider is supreme, Name is first", and will sincerely create and share success with all clientele for Laser Lamp, Middle Infrared Crystals, Pure Yag, Our team members are aim to provides products with high performance cost ratio to our customers, and the goal for all of us is to satisfy our consumers from all over the world.
OEM Supply Er Glass - Ce: YAG Crystals – Dien Detail:

Ho:YAG Ho3+ ions doped into insulating laser crystals have exhibited 14 inter-manifold laser channels, operating in temporal modes from CW to mode-locked . Ho:YAG is commonly used as an efficient means to generate 2.1-μm laser emission from the 5I7- 5I8 transition, for applications such as laser remote sensing, medical surgery, and pumping Mid-IR OPO’s to achieve 3-5micron emission. Direct diode pumped systems,and Tm: Fiber Laser pumped system have demonstrated hi slope efficiencies, some approaching the theoretical limit.


Basic Properties

Ho3+ concentration range 0.005 – 100 atomic %
Emission Wavelength 2.01 um
Laser Transition 5I75I8
Flouresence Lifetime 8.5 ms
Pump Wavelength 1.9 um
Coefficient of Thermal Expansion 6.14 x 10-6 K-1
Thermal Diffusivity 0.041 cm2 s-2
Thermal Conductivity 11.2 W m-1 K-1
Specific Heat (Cp) 0.59 J g-1 K-1
Thermal Shock Resistant 800 W m-1
Refractive Index @ 632.8 nm 1.83
Melting Point 1965℃
Density 4.56 g cm-3
MOHS Hardness 8.25
Young’s Modulus 335 Gpa
Crystal Structure Cubic
Standard Orientation <111>
Y3+ Site Symmetry D2
Lattice Constant a=12.013 Å


Technical Parameters

Wavefront distortion L/8per inch @633nm
Extinction ratio >28dB
Wavefront distortion L/8per inch @633nm
Extinction ratio >28dB
Tolerance:Rods with diameter (+0、-0.05)mm,( ±0.5) mm
Surface quality 10/5 Scratch/dig per MIL-O-1380A
Parallelism <10arc seconds
Perpendicularity <5arc minutes
Aperture >90%
Flatness λ/10@ 633 nm
Tolerance:Rods with diameter (+0、-0.05)mm,( ±0.5) mm Surface quality 10/5 Scratch/dig per MIL-O-1380A Parallelism <10arc seconds Perpendicularity <5arc minutes Aperture >90% Flatness λ/10@ 633 nm


Absorption coefficient

Er YAG02


Product detail pictures:

OEM Supply Er Glass - Ce: YAG Crystals – Dien detail pictures

OEM Supply Er Glass - Ce: YAG Crystals – Dien detail pictures


Related Product Guide:

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of OEM Supply Er Glass - Ce: YAG Crystals – Dien , The product will supply to all over the world, such as: Pretoria, Argentina, Netherlands, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We're able to also give you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and items, make sure you speak to us by sending us emails or call us quickly. In an effort to know our merchandise and company extra, you may come to our factory to view it. We'll generally welcome guests from all over the world to our business to create business relations with us. Be sure to feel cost-free to speak to us for small business and we believe we are going to share the best trading experience with all our merchants.
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
5 Stars By Henry from Jamaica - 2018.09.08 17:09
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
5 Stars By Joanna from Indonesia - 2017.02.14 13:19