Manufactur standard Q Switched Crystal For1064nm - Co:Spinel Crystals – Dien
Manufactur standard Q Switched Crystal For1064nm - Co:Spinel Crystals – Dien Detail:
Passive Q-switches or saturable absorbers generate high power laser pulses without the use of electro-optic Q-switches, thereby reducing the package size and eliminating a high voltage power supply. Co2+:MgAl2O4 is a relatively new material for passive Q-switching in lasers emitting from 1.2 to 1.6μm, in particular, for eye-safe 1.54μm Er:glass laser, but also works at 1.44μm and 1.34μm laser wavelengths. Spinel is a hard, stable crystal that polishes well. Cobalt substitutes readily for magnesium in the Spinel host without the need for additional charge compensation ions. High absorption cross section (3.5×10-19 cm2) permits Q-switching of Er:glass laser without intracavity focusing both with flash-lamp and diode laser pumping. Negligible excited-state absorption results in high contrast ratio of Q-switch, i.e. the ratio of initial (small signal) to saturated absorption is higher than 10.
• Suitable for 1540 nm eye-safe lasers
• High absorption section
• Negligible excited state absorption
• High optical quality
• Uniformly distributed Co
• Eye-safe 1540 nm Er:glass laser
• 1440 nm laser
• 1340 nm laser
• Eye-safe laser range finder
| Chemical formula | Co2+:MgAl2O4 |
| Crystal structure | Cubic |
| Lattice parameters | 8.07Å |
| Density | 3.62 g/cm3 |
| Melting Point | 2105°C |
| Refractive Index | n=1.6948 @1.54 µm |
| Thermal Conductivity /(W·cm-1·K-1@25°C) | 0.033W |
| Specific Heat/ (J·g-1·K-1) | 1.046 |
| Thermal Expansion /（10-6 /°C@25°C ） | 5.9 |
| Hardness (Mohs) | 8.2 |
| Extinction Ratio | 25dB |
| Orientation | [100] or [111] < ±0.5° |
| Optical density | 0.1-0.9 |
| Damage Threshold | >500 MW/cm2 |
| Doping concentration of Co2+ | 0.01-0.3 atm% |
| Absorption coefficient | 0 ～ 7 cm-1 |
| Working wavelength | 1200 – 1600 nm |
| Coatings | AR/AR@1540，R<0.2%; AR/AR@1340，R<0.2% |
| Orientation Tolerence | < 0.5° |
| Thickness/Diameter Tolerance | ±0.05 mm |
| Surface Flatness | <λ/8@632 nm |
| Wavefront Distortion | <λ/4@632 nm |
| Surface Quality | 10/5 |
| Parallel | 10〞 |
| Perpendicular | 5ˊ |
| Clear Aperture | >90% |
| Chamfer | <0.1×45° |
| Maximum dimensions | Dia(3-15)×(3-50)mm |
Product detail pictures:
Related Product Guide:
We've got quite possibly the most state-of-the-art production gear, experienced and qualified engineers and workers, acknowledged top quality handle systems along with a friendly expert gross sales group pre/after-sales support for Manufactur standard Q Switched Crystal For1064nm - Co:Spinel Crystals – Dien , The product will supply to all over the world, such as: Karachi, Brisbane, Slovenia, We've been always creating new technology to streamline the production, and give products with competitive prices and high quality! Customer satisfaction is our priority! You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We are going to present our best service to satisfy all your needs! Remember to contact us right away!
By Monica from The Swiss - 2017.08.15 12:36
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Jack from Bandung - 2018.02.12 14:52
Products categories
-
Phone
Phone
-
Email
Email
-
whatsapp
whatsapp
-
Wechat
Wechat
-
Top
