factory customized Zinc Selenide Lens - Ho: YAG Crystals – Dien
factory customized Zinc Selenide Lens - Ho: YAG Crystals – Dien Detail:
Ho:YAG Ho3+ ions doped into insulating laser crystals have exhibited 14 inter-manifold laser channels, operating in temporal modes from CW to mode-locked . Ho:YAG is commonly used as an efficient means to generate 2.1-μm laser emission from the 5I7- 5I8 transition, for applications such as laser remote sensing, medical surgery, and pumping Mid-IR OPO’s to achieve 3-5micron emission. Direct diode pumped systems,and Tm: Fiber Laser pumped system have demonstrated hi slope efficiencies, some approaching the theoretical limit.
| Ho3+ concentration range | 0.005 – 100 atomic % |
| Emission Wavelength | 2.01 um |
| Laser Transition | 5I7 → 5I8 |
| Flouresence Lifetime | 8.5 ms |
| Pump Wavelength | 1.9 um |
| Coefficient of Thermal Expansion | 6.14 x 10-6 K-1 |
| Thermal Diffusivity | 0.041 cm2 s-2 |
| Thermal Conductivity | 11.2 W m-1 K-1 |
| Specific Heat (Cp) | 0.59 J g-1 K-1 |
| Thermal Shock Resistant | 800 W m-1 |
| Refractive Index @ 632.8 nm | 1.83 |
| Melting Point | 1965℃ |
| Density | 4.56 g cm-3 |
| MOHS Hardness | 8.25 |
| Young’s Modulus | 335 Gpa |
| Crystal Structure | Cubic |
| Standard Orientation | <111> |
| Y3+ Site Symmetry | D2 |
| Lattice Constant | a=12.013 Å |
| Wavefront distortion | L/8per inch @633nm |
| Extinction ratio | >28dB |
| Wavefront distortion | L/8per inch @633nm |
| Extinction ratio | >28dB |
| Tolerance：Rods with diameter | (+0、-0.05)mm,( ±0.5) mm |
| Surface quality | 10/5 Scratch/dig per MIL-O-1380A |
| Parallelism | <10arc seconds |
| Perpendicularity | <5arc minutes |
| Aperture | >90% |
| Flatness | λ/10@ 633 nm |
| Tolerance：Rods with diameter | (+0、-0.05)mm,( ±0.5) mm |
| Surface quality | 10/5 Scratch/dig per MIL-O-1380A |
| Parallelism | <10arc seconds |
| Perpendicularity | <5arc minutes |
| Aperture | >90% |
| Flatness | λ/10@ 633 nm |
Product detail pictures:
Related Product Guide:
We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for factory customized Zinc Selenide Lens - Ho: YAG Crystals – Dien , The product will supply to all over the world, such as: Argentina, Hongkong, Slovak Republic, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Tyler Larson from Azerbaijan - 2018.11.04 10:32
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Ryan from Liberia - 2018.06.09 12:42
Products categories
-
Phone
Phone
-
Email
Email
-
whatsapp
whatsapp
-
Wechat
Wechat
-
Top
