China Factory for Xenon Lamp - Co:Spinel Crystals – Dien
China Factory for Xenon Lamp - Co:Spinel Crystals – Dien Detail:
Passive Q-switches or saturable absorbers generate high power laser pulses without the use of electro-optic Q-switches, thereby reducing the package size and eliminating a high voltage power supply. Co2+:MgAl2O4 is a relatively new material for passive Q-switching in lasers emitting from 1.2 to 1.6μm, in particular, for eye-safe 1.54μm Er:glass laser, but also works at 1.44μm and 1.34μm laser wavelengths. Spinel is a hard, stable crystal that polishes well. Cobalt substitutes readily for magnesium in the Spinel host without the need for additional charge compensation ions. High absorption cross section (3.5×10-19 cm2) permits Q-switching of Er:glass laser without intracavity focusing both with flash-lamp and diode laser pumping. Negligible excited-state absorption results in high contrast ratio of Q-switch, i.e. the ratio of initial (small signal) to saturated absorption is higher than 10.
• Suitable for 1540 nm eye-safe lasers
• High absorption section
• Negligible excited state absorption
• High optical quality
• Uniformly distributed Co
• Eye-safe 1540 nm Er:glass laser
• 1440 nm laser
• 1340 nm laser
• Eye-safe laser range finder
| Chemical formula | Co2+:MgAl2O4 |
| Crystal structure | Cubic |
| Lattice parameters | 8.07Å |
| Density | 3.62 g/cm3 |
| Melting Point | 2105°C |
| Refractive Index | n=1.6948 @1.54 µm |
| Thermal Conductivity /(W·cm-1·K-1@25°C) | 0.033W |
| Specific Heat/ (J·g-1·K-1) | 1.046 |
| Thermal Expansion /（10-6 /°C@25°C ） | 5.9 |
| Hardness (Mohs) | 8.2 |
| Extinction Ratio | 25dB |
| Orientation | [100] or [111] < ±0.5° |
| Optical density | 0.1-0.9 |
| Damage Threshold | >500 MW/cm2 |
| Doping concentration of Co2+ | 0.01-0.3 atm% |
| Absorption coefficient | 0 ～ 7 cm-1 |
| Working wavelength | 1200 – 1600 nm |
| Coatings | AR/AR@1540，R<0.2%; AR/AR@1340，R<0.2% |
| Orientation Tolerence | < 0.5° |
| Thickness/Diameter Tolerance | ±0.05 mm |
| Surface Flatness | <λ/8@632 nm |
| Wavefront Distortion | <λ/4@632 nm |
| Surface Quality | 10/5 |
| Parallel | 10〞 |
| Perpendicular | 5ˊ |
| Clear Aperture | >90% |
| Chamfer | <0.1×45° |
| Maximum dimensions | Dia(3-15)×(3-50)mm |
Product detail pictures:
Related Product Guide:
We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for China Factory for Xenon Lamp - Co:Spinel Crystals – Dien , The product will supply to all over the world, such as: Kyrgyzstan, Kuwait, Niger, By integrating manufacturing with foreign trade sectors, we can offer total customer solutions by guaranteeing the delivery of right items to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified product portfolios and the control of the industry trend as well as our mature before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
By ROGER Rivkin from Manchester - 2017.02.28 14:19
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Norma from Angola - 2017.11.20 15:58
Products categories
-
Phone
Phone
-
Email
Email
-
whatsapp
whatsapp
-
Wechat
Wechat
-
Top
